[Noticias] Endian Firewall Community 2.5.2 DISPONIVEL

[aroldobossoni]

Endian firewall 2.5.2 community version now available
After a long time, we are ready to announce the Endian Firewall Community 2.5.2 release.
This release is mainly a bug fixing one.
A list of the main changes and updates to follow:
• Antivirus
ClamAV has been updated to the most recent version to make sure signature updates will continue to work.
• Anti-spyware
Lists are now being provided by PhishTank instead of Malware Domains. This not only results in more sites being recognized correctly but also allows us to show an information page with a link to PhishTank's description of the malicious website instead of displaying an empty page.
• Hardware support
Support for various hardware devices has been added. This support for USB modems
as well as drivers for network interface cards and hard disk controllers.
You can easily download  version 2.5.2 here: http://www.endian.com/en/community/download/
The 2.5.1 version users should follow the instructions received at the registration time via email to update the software.
If you’re using an older version than 2.5.1, try to get the update following the aforementioned instructions. In case of failure, please download the new version and re – install the system.
Enjoy the new Release
Your Endian Team


Release Notes - Version 2.5.2

** New Features
    * [UTM-250]        - PhishTank as anti-phishing protection
    * [CORE-82]        - Show signatures update time in the dashboard
    * [CORE-477]      - Intel drivers for the newest Intel network
                        interface cards
    * [CORE-222]      - Support for USB Huawei E173 USB UMTS modem


** Improvements
    * [UTM-68]        - ClamAV engine update to version 0.97.8
    * [CORE-184]      - The collectd netlink plugin stores information
                        that is never used
    * [CORE-89]        - EMI does not load sqlite anymore
    * [CORE-259]      - EMI storage is not read/write-safe
    * [CORE-63]        - In Port forwarding / DNAT the default mode
                        should be simple instead of advanced
    * [UTM-250]        - PhishTank lists replace lists from
                        malwaredomains
    * [CORE-285]      - Packaged signatures tarball with new PhishTank
                        signatures  instead of those from
                        malwaredomains
    * [CORE-105]      - Monit method needs an additional attribute
                        monitor=False which prevents monitor/unmonitor
                        command from getting sent to monit
    * [CORE-189]      - Store collectd RRD files in /tmp and
                        periodically synchronize to /var
    * [CORE-164]      - Delete archived log files when free space is
                        needed
    * [CORE-231]      - Use collectd graphs instead of squid-graph
    * [CORE-206]      - Replace makegraphs.pl with collectd graphs
    * [UTM-110]        - Remove collectd's ntp RRD files
    * [UTM-80]        - New version of ntop
    * [CORE-240]      - Ethernet bonding support
    * [UTM-40]        - DansGuardian custom *regexp file is not handled
                        correctly


** Bugs
    * [UTM-115]        - ClamAV blocks .exe files due to issues in its
                        DetectBrokenExecutables check
    * [UTM-86]        - HAVP does not run after an upgrade to 2.5
    * [UTM-65]        - “Block encrypted archives” flag was doing
                        exactly the opposite of what had been
                        configured
    * [UTM-63]        - Wrong status message in ClamAV page before the
                        first signature update
    * [CORE-132]      - The Authentication layer does not start due to
                        an UTF-8 problem
    * [CORE-125]      - Authentication job is not started after
                        finishing the initial wizard
    * [CORE-367]      - Old backups cannot be downloaded after
                        migrating to 2.5
    * [CORE-288]      - USB stick not detected correctly by
                        efw-backupusb
    * [CORE-278]      - When cleaning the system USB backups are not
                        considered
    * [CORE-148]      - Instead of keeping 3 USB backups when rotating
                        only 2 are kept
    * [CORE-113]      - Error creating the cron link for scheduled
                        automatic backups
    * [CORE-220]      - More backups than configured are stored
    * [CORE-427]      - Deadlock during the reading/writing of
                        SettingFiles
    * [CORE-264]      - Logout button does not work for all browsers
    * [CORE-236]      - After an update efw-shell does not display
                        correctly the new/updated commands"
    * [CORE-122]      - In policy routing rules only CS0 Type of
                        Service can be selected
    * [CORE-107]      - Dnsmasq sometimes fails to restart which causes
                        monit to use a huge amount of resources
    * [CORE-88]        - Backup uplinks do not work if they are Ethernet
                        uplinks
    * [CORE-497]      - Collectd does not start on boot with new
                        version of monit
    * [CORE-211]      - Dependency to efw-httpd is missing
    * [COMMUNITY-15]  - RPM triggers interrupt update process
    * [CORE-451]      - GUI port is hardcoded for redirection
    * [CORE-268]      - Reboot required not shown after kernel upgrade
    * [CORE-482]      - emicommand hangs because of curl blocking
    * [CORE-137]      - YAML storage raises an exception when trying to
                        load a valid YAML file that contains a list
                        instead of a dictionary
    * [CORE-369]      - Interzone firewall rules are not created after
                        migration to 2.5
    * [CORE-119]      - When switching from advanced to simple mode
                        editing destination NAT rules the filter policy
                        is changed to ALLOW
    * [CORE-118]      - Target port of Destination NAT is not disabled
                        when the incoming protocol is "Any"
    * [CORE-115]      - Incoming Service/Port field of Port forwarding/
                        Destination NAT is editable, even if Service
                        and Protocol are both set to "Any"
    * [CORE-106]      - The bridges job status is wrong, "restart"
                        instead of "start"
    * [CORE-335]      - jobcontrol hangs when sync restarting jobs
    * [CORE-326]      - Jobengine exception during update
    * [CORE-257]      - Jobs are unnecessarily restarted multiple times
    * [CORE-248]      - Jobsengine memory leak when OpenVPN client
                        connects
    * [CORE-131]      - The efw-shell command "job" does not work due
                        to a syntax error
    * [CORE-124]      - AnaCronJob uses Job.start which sets force=True
                        even if not needed
    * [CORE-123]      - DownloadJob uses Job.start which sets
                        force=True even if not needed
    * [CORE-120]      - Timestamping signatures are recreated although
                        force is not set to true in CrawlerJob
    * [CORE-321]      - After migration from 2.4 to 2.5 RAID controller
                        mptsas is not working anymore
    * [CORE-303]      - Intel Network driver igb not supported for Quad
                        Intel 82580 Gigabit Network
    * [CORE-190]      - Enable FUSION_SAS driver
    * [CORE-332]      - twistd.log are not compressed and rotated in /
    * [CORE-247]      - Logrotate not run under various circumstances
    * [CORE-87]        - ntop UI is not accessible
    * [CORE-251]      - Logrotate configuration file is removed when
                        logrotate package is upgraded after efw-syslog
    * [CORE-203]      - purge-log-archives script fails under special
                        circumstances
    * [UTM-414]        - ntop segfault in libc-2.3.4.so/libntop-4.1.0.so
    * [UTM-244]        - ntop crashes if it is asked to monitor a
                        interface that is down
    * [CORE-343]      - VLAN configuration problem
    * [CORE-174]      - Local routes are missing in ip rule so user
                        defined rules always overrule local routes
    * [CORE-86]        - Policy Routing rules are not applied
    * [CORE-80]        - Upgrade of stripped RPM packages destroys
                        configuration files
    * [UTM-378]        - Double efw-dnsmasq packages after upgrade
    * [UTM-338]        - When updating efw-dnsmasq the httpd
                        configuration file is removed
    * [UTM-322]        - Anti-spyware signatures last update date is
                        inconsistent
    * [UTM-320]        - DNS black- and whitelists are ignored until the
                        cron job runs
    * [UTM-317]        - DNS anti-spyware blacklist is not working
    * [UTM-316]        - Black- and whitelisted domains are not erased
                        after saving settings
    * [UTM-88]        - Unable to download malwaredomains information
    * [UTM-181]        - Proxy PAC is not applied
    * [UTM-93]        - Denial of service triggered by access to the
                        proxy port
    * [UTM-90]        - DansGuardian blacklists and phraselists are
                        missing after an upgrade to 2.5
    * [UTM-87]        - DansGuardian blacklists and phraselists cannot
                        be downloaded
    * [UTM-55]        - Clamd is not started before HAVP
    * [UTM-194]        - HTTP proxy configuration ignores rules under
                        certain circumstances
    * [UTM-81]        - IMAP authentication fails if username contains
                        a @domain part.
    * [CORE-219]      - TOS/DSCP option breaks Quality of Service
    * [UTM-119]        - Snort is restarted twice during boot time
    * [CORE-138]      - System uptime is shown incorrectly
    * [CORE-396]      - Migration not called after upgrade to 2.5 due
                        to collectd
    * [CORE-159]      - Certain migration scripts are not executed
    * [CORE-129]      - Migration framework causes tracebacks if an RPM
                        package has an epoch set and a migration script
                        for it exists
    * [UTM-108]        - OpenVPN client calls missing "remove_rules"
                        method which is not controlled by jobengine and
                        uses a deprecated function
    * [UTM-95]        - Selecting GREEN in IPsec GUI corrupts IPsec
                        configuration file
    * [UTM-230]        - OpenVPN job fails to create user configuration
                        files if the push orange or push blue options
                        are enabled
    * [UTM-97]        - OpenVPN process cannot remove temporary files
                        because of wrong file owner
    * [CORE-221]      - OpenVPN client TUN device configuration is
                        broken
    * [UTM-200]        - Route to subnet behind OpenVPN gateway-to-
                        gateway user is set with wrong gateway IP
                        address if the user has a static IP assigned

Source: README, updated 2013-08-23

[Elton]

\o/ uollll ai sim heinnnnnnnn

[leandroxr]

bora baixar para testar \o/ , ou atualizar da versão 5.1 ?

[matheusantos83]

Mais garantido instalação nova...

[marceloleaes]

Endian Bugwall 2.5.2