[Ajuda] Drive e1000e no endian 3.0

[thiagonmat]

Galera estou como endian 3.0 e preciso compilar o drive e1000e porém o comando rpmbuild não funfa, algum de vcs tem esse drive compilado para me passar ou pode me enviar um tuto de como instalar esse drive sem ser compilado?
Abraços

[marceloleaes]

Experimenta os rpms da 2.5.1 , deve funcionar

http://repo.opensource-sw.net/efw/2.5.1 ... index.html

Lógico, não aplique no ambiente de produção

[Elton]

o .rpm que o Marcelo passou coloquei nesse anexo!!

[thiagonmat]

ok valeu vou tentar aqui.

me diz uma coisa se eu instalar e configurar o 2.51 deixar tudo redondinho e depois atualizar pro 3.0 vai dar pau????

[Elton]

sim concerteza man nem faça isso... primeiro o endian 3.0 não trabalha mais com o dansguardian e outra o endian sempre muda os pacotes e bibliotecas!

[thiagonmat]

mano obrigado pela ajuda mas agora da outro erro, quando tento instalar o rpm que esta aqui no tópico recebo esta mensagem

error: Failed dependencies:
        e1000e-driver is needed by e1000e-1.3.10a-2.endian2_2.6.32.43_57.e43.i586

ai vou instalar o driver para que possa dar certo e recebo esta outra menssagem.

Makefile:76: *** Kernel header files not in any of the expected locations.
Makefile:77: *** Install the appropriate kernel development package, e.g.
Makefile:78: *** kernel-devel, for building kernel modules and try again.  Stop.

mano como isso é chato srsrs

[thiagonmat]

galera vcs podem por favor criar um rpm deste arquivo pra mim pq m eu endian não faz isso nem a pau
abraços e obrigado

[Elton]

segue veja se funfa rodei no meu lubuntu o rpmbuild. me fala se funfou 

[thiagonmat]

mano obtive a seguinte resposta:

rpm -Uvh http://www.site000.com.br/info/e1000e-3.0.4-1.i386.rpm
Retrieving http://www.site000.com.br/info/e1000e-3.0.4-1.i386.rpm
Preparing...                ########################################### [100%]
  1:e1000e                ########################################### [100%]
original pci.ids saved in /usr/local/share/e1000e
cp: missing destination file
Try `cp --help' for more information.
WARNING: Running kernel is 2.6.32.43-57.e43.i686.PAE.  RPM supports kernels (  3.11.0-12-generic  )
bash: line 11: /usr/share/doc/e1000e-3.0.4/pci.ids.new: No such file or directory
bash: line 236: 5: Bad file descriptor
mv: missing file argument
Try `mv --help' for more information.

e muito obrigado pelo arquivo e pela ajuda:)

[Elton]

axo que esse tar que vc me mandou não suporta nesse kernel man!!!

[thiagonmat]

então peguei ele no site da intel direto
mano to ficanod doido com isso ja que drive chato, estou usando o kernel 1686 para subir os 16gb de ram que tenho aqui, vc tem ou sabe onde tem algum drive que funcione nele?
abraços

[Elton]

tenta rodar esse comand rpm -Uvh --nodeps pacote.rpm. nesse pacote que ta no anexo

[thiagonmat]

kkkk mano agora fudeu geral (desculpe a palavra) deu que esta instalado mas a placa não sobe olhe:


rpm -Uvh --nodeps http://www.site000.com.br/info/e1000e-1 ... 3.i586.rpm
Retrieving http://www.site000.com.br/info/e1000e-1 ... 3.i586.rpm
warning: /var/tmp/rpm-xfer.oBVIhm: Header V3 DSA signature: NOKEY, key ID b61a86c9
Preparing...                ########################################### [100%]
        package e1000e-3.0.4-1.i386 (which is newer than e1000e-1.3.10a-2.endian2_2.6.32.43_57.e43.i586) is already installed

[Elton]

qual o erro que apresenta quando sobe a placa? roda o dmesg e veja se ela se encontra lah ou lspci

[thiagonmat]

Recebo isto ao executar o dmesg:



root@Firewall:~ # dmesg
[    0.000000] Linux version 2.6.32.43-57.e43.i686.PAE (root@andrew) (gcc version 4.1.2 20070626 (Endian 4.1.2-14)) #1 SMP Wed Aug 10 05:54:43 EDT 2011
[    0.000000] KERNEL supported cpus:
[    0.000000]  Intel GenuineIntel
[    0.000000]  AMD AuthenticAMD
[    0.000000]  NSC Geode by NSC
[    0.000000]  Cyrix CyrixInstead
[    0.000000]  Centaur CentaurHauls
[    0.000000]  Transmeta GenuineTMx86
[    0.000000]  Transmeta TransmetaCPU
[    0.000000]  UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000a74b4000 (usable)
[    0.000000]  BIOS-e820: 00000000a74b4000 - 00000000a74bb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000a74bb000 - 00000000a844a000 (usable)
[    0.000000]  BIOS-e820: 00000000a844a000 - 00000000a8986000 (reserved)
[    0.000000]  BIOS-e820: 00000000a8986000 - 00000000ba1a8000 (usable)
[    0.000000]  BIOS-e820: 00000000ba1a8000 - 00000000ba3bc000 (reserved)
[    0.000000]  BIOS-e820: 00000000ba3bc000 - 00000000ba3d0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000ba3d0000 - 00000000ba4a4000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ba4a4000 - 00000000bafff000 (reserved)
[    0.000000]  BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[    0.000000]  BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000043f600000 (usable)
[    0.000000] DMI 2.7 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x43f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]  00000-9FFFF write-back
[    0.000000]  A0000-BFFFF uncachable
[    0.000000]  C0000-CFFFF write-protect
[    0.000000]  D0000-E7FFF uncachable
[    0.000000]  E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]  0 base 0000000000 mask 7C00000000 write-back
[    0.000000]  1 base 0400000000 mask 7FC0000000 write-back
[    0.000000]  2 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]  3 base 00BC000000 mask 7FFC000000 uncachable
[    0.000000]  4 base 00BB800000 mask 7FFF800000 uncachable
[    0.000000]  5 base 043F800000 mask 7FFF800000 uncachable
[    0.000000]  6 base 043F600000 mask 7FFFE00000 uncachable
[    0.000000]  7 disabled
[    0.000000]  8 disabled
[    0.000000]  9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 16GB, type WB
[    0.000000] reg 1, base: 16GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] reg 3, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 4, base: 3000MB, range: 8MB, type UC
[    0.000000] reg 5, base: 17400MB, range: 8MB, type UC
[    0.000000] reg 6, base: 17398MB, range: 2MB, type UC
[    0.000000] total RAM covered: 16302M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 128M        num_reg: 9      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3000MB, range: 8MB, type UC
[    0.000000] reg 3, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 4, base: 4GB, range: 4GB, type WB
[    0.000000] reg 5, base: 8GB, range: 8GB, type WB
[    0.000000] reg 6, base: 16GB, range: 1GB, type WB
[    0.000000] reg 7, base: 17398MB, range: 2MB, type UC
[    0.000000] reg 8, base: 17400MB, range: 8MB, type UC
[    0.000000] e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] initial memory mapped : 0 - 00e00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037600000 page 2M
[    0.000000]  0037600000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-17000
[    0.000000] RAMDISK: 37fce000 - 37fefa7b
[    0.000000] Allocated new RAMDISK: 00014000 - 00035a7b
[    0.000000] Move RAMDISK from 0000000037fce000 - 0000000037fefa7a to 00014000 - 00035a7a
[    0.000000] ACPI: RSDP 000f0490 00024 (v02 ALASKA)
[    0.000000] ACPI Warning: BIOS XSDT has NULL entry, using RSDT (20090903/tbutils-585)
[    0.000000] ACPI: RSDT ba3c0028 0004C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: FACP ba3c0100 00084 (v02 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT ba3c0188 0AE12 (v02 ALASKA    A M I 000000F5 INTL 20091112)
[    0.000000] ACPI: FACS ba4a2040 00040
[    0.000000] ACPI: APIC ba3cb0b0 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT ba3cb128 00539 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT ba3cb668 00AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG ba3cc140 0003C (v01                01072009 MSFT 00000097)
[    0.000000] ACPI: HPET ba3cc180 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT ba3cc1b8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT ba3cc528 03299 (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
[    0.000000] ACPI: DMAR ba3cf7c8 000B8 (v01 INTEL      HSW  00000001 INTL 00000001)
[    0.000000] ACPI: MATS ba3cf880 00034 (v02 ALASKA    A M I 00000002 w?x2 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 16510MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]  mapped low ram: 0 - 377fe000
[    0.000000]  low ram: 0 - 377fe000
[    0.000000]  node 0 low ram: 00000000 - 377fe000
[    0.000000]  node 0 bootmap 00036000 - 0003cf00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]  #0 [0000000000 - 0000001000]  BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]  #2 [0000006000 - 0000007000]      TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]  #3 [0000400000 - 0000902984]    TEXT DATA BSS ==> [0000400000 - 0000902984]
[    0.000000]  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
[    0.000000]  #5 [0000903000 - 000090a1f9]              BRK ==> [0000903000 - 000090a1f9]
[    0.000000]  #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
[    0.000000]  #7 [0000014000 - 0000035a7b]      NEW RAMDISK ==> [0000014000 - 0000035a7b]
[    0.000000]  #8 [0000036000 - 000003d000]          BOOTMAP ==> [0000036000 - 000003d000]
[    0.000000] found SMP MP-table at [c00fd740] fd740
[    0.000000] Zone PFN ranges:
[    0.000000]  DMA      0x00000010 -> 0x00001000
[    0.000000]  Normal  0x00001000 -> 0x000377fe
[    0.000000]  HighMem  0x000377fe -> 0x0043f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]    0: 0x00000010 -> 0x0000009d
[    0.000000]    0: 0x00000100 -> 0x000a74b4
[    0.000000]    0: 0x000a74bb -> 0x000a844a
[    0.000000]    0: 0x000a8986 -> 0x000ba1a8
[    0.000000]    0: 0x000bafff -> 0x000bb000
[    0.000000]    0: 0x00100000 -> 0x0043f600
[    0.000000] On node 0 totalpages: 4166131
[    0.000000] free_area_init_node: node 0, pgdat c07fc5c0, node_mem_map c1001200
[    0.000000]  DMA zone: 32 pages used for memmap
[    0.000000]  DMA zone: 0 pages reserved
[    0.000000]  DMA zone: 3949 pages, LIFO batch:0
[    0.000000]  Normal zone: 1744 pages used for memmap
[    0.000000]  Normal zone: 221486 pages, LIFO batch:31
[    0.000000]  HighMem zone: 33021 pages used for memmap
[    0.000000]  HighMem zone: 3905899 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c9a00000 s33752 r0 d23592 u524288
[    0.000000] pcpu-alloc: s33752 r0 d23592 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4131334
[    0.000000] Kernel command line: root=UUID=55b79863-dba2-4a0d-9675-9781a65816b2 panic=10 quiet ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Initializing HighMem for node 0 (000377fe:0043f600)
[    0.000000] Memory: 16517664k/17815552k available (2635k kernel code, 145628k reserved, 1475k data, 448k init, 15755680k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]    fixmap  : 0xffd55000 - 0xfffff000  (2728 kB)
[    0.000000]    pkmap  : 0xff800000 - 0xffa00000  (2048 kB)
[    0.000000]    vmalloc : 0xf7ffe000 - 0xff7fe000  ( 120 MB)
[    0.000000]    lowmem  : 0xc0000000 - 0xf77fe000  ( 887 MB)
[    0.000000]      .init : 0xc0804000 - 0xc0874000  ( 448 kB)
[    0.000000]      .data : 0xc0692dd6 - 0xc0803ca8  (1475 kB)
[    0.000000]      .text : 0xc0400000 - 0xc0692dd6  (2635 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU-based detection of stalled CPUs is enabled.
[    0.000000] NR_IRQS:1280
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 3392.281 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.56 BogoMIPS (lpj=3392281)
[    0.000014] Security Framework initialized
[    0.000016] SELinux:  Initializing.
[    0.000019] SELinux:  Starting in permissive mode
[    0.000024] Mount-cache hash table entries: 512
[    0.000130] CPU: Physical Processor ID: 0
[    0.000131] CPU: Processor Core ID: 0
[    0.000133] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000134] CPU: L2 cache: 256K
[    0.000134] CPU: L3 cache: 6144K
[    0.000137] mce: CPU supports 9 MCE banks
[    0.000146] CPU0: Thermal monitoring enabled (TM1)
[    0.000147] CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
[    0.000155] using mwait in idle threads.
[    0.000156] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[    0.000159] ... version:                3
[    0.000159] ... bit width:              48
[    0.000160] ... generic registers:      8
[    0.000161] ... value mask:            0000ffffffffffff
[    0.000162] ... max period:            000000007fffffff
[    0.000162] ... fixed-purpose events:  3
[    0.000163] ... event mask:            00000007000000ff
[    0.000167] Checking 'hlt' instruction... OK.
[    0.004251] ACPI: Core revision 20090903
[    0.027852] Not enabling x2apic, Intr-remapping init failed.
[    0.027855] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028170] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.038144] CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
[    0.139887] Booting processor 1 APIC 0x2 ip 0x6000
[    0.150202] Initializing CPU#1
[    0.210635] CPU: Physical Processor ID: 0
[    0.210636] CPU: Processor Core ID: 1
[    0.210637] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.210638] CPU: L2 cache: 256K
[    0.210639] CPU: L3 cache: 6144K
[    0.210649] CPU1: Thermal monitoring enabled (TM1)
[    0.210650] CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[    0.210714] CPU1: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
[    0.210719] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.230712] Booting processor 2 APIC 0x4 ip 0x6000
[    0.240983] Initializing CPU#2
[    0.301364] CPU: Physical Processor ID: 0
[    0.301364] CPU: Processor Core ID: 2
[    0.301366] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.301367] CPU: L2 cache: 256K
[    0.301367] CPU: L3 cache: 6144K
[    0.301378] CPU2: Thermal monitoring enabled (TM1)
[    0.301379] CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[    0.301439] CPU2: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
[    0.301443] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.321436] Booting processor 3 APIC 0x6 ip 0x6000
[    0.331706] Initializing CPU#3
[    0.392092] CPU: Physical Processor ID: 0
[    0.392093] CPU: Processor Core ID: 3
[    0.392094] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.392095] CPU: L2 cache: 256K
[    0.392096] CPU: L3 cache: 6144K
[    0.392106] CPU3: Thermal monitoring enabled (TM1)
[    0.392107] CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[    0.392162] CPU3: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
[    0.392166] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.412127] Brought up 4 CPUs
[    0.412128] Total of 4 processors activated (27135.74 BogoMIPS).
[    0.414361] regulator: core version 0.5
[    0.414421] NET: Registered protocol family 16
[    0.414601] ACPI: bus type pci registered
[    0.414717] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.414719] PCI: MCFG area at f8000000 reserved in E820
[    0.414720] PCI: Using MMCONFIG for extended config space
[    0.414720] PCI: Using configuration type 1 for base access
[    0.417794] bio: create slab <bio-0> at 0
[    0.418748] ACPI: EC: Look up EC in DSDT
[    0.425941] ACPI: Executed 1 blocks of module-level executable AML code
[    0.432353] ACPI: BIOS _OSI(Linux) query ignored
[    0.440050] ACPI: Interpreter enabled
[    0.440053] ACPI: (supports S0 S3 S5)