Forumitbr.com.br

[    0.440090] ACPI: Using IOAPIC for interrupt routing
[    0.464397] ACPI: Power Resource [FN00] (off)
[    0.464463] ACPI: Power Resource [FN01] (off)
[    0.464527] ACPI: Power Resource [FN02] (off)
[    0.464590] ACPI: Power Resource [FN03] (off)
[    0.464653] ACPI: Power Resource [FN04] (off)
[    0.465222] ACPI: No dock devices found.
[    0.466270] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.466350] pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf03fffff]
[    0.466354] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.466356] pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
[    0.466376] pci 0000:00:03.0: reg 10 64bit mmio: [0xf0634000-0xf0637fff]
[    0.466429] pci 0000:00:14.0: reg 10 64bit mmio: [0xf0620000-0xf062ffff]
[    0.466457] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.466460] pci 0000:00:14.0: PME# disabled
[    0.466491] pci 0000:00:16.0: reg 10 64bit mmio: [0xf063f000-0xf063f00f]
[    0.466522] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.466524] pci 0000:00:16.0: PME# disabled
[    0.466561] pci 0000:00:19.0: reg 10 32bit mmio: [0xf0600000-0xf061ffff]
[    0.466565] pci 0000:00:19.0: reg 14 32bit mmio: [0xf063d000-0xf063dfff]
[    0.466569] pci 0000:00:19.0: reg 18 io port: [0xf080-0xf09f]
[    0.466598] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.466600] pci 0000:00:19.0: PME# disabled
[    0.466639] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf063c000-0xf063c3ff]
[    0.466683] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.466686] pci 0000:00:1a.0: PME# disabled
[    0.466717] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0630000-0xf0633fff]
[    0.466748] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.466750] pci 0000:00:1b.0: PME# disabled
[    0.466795] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.466798] pci 0000:00:1c.0: PME# disabled
[    0.466845] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.466847] pci 0000:00:1c.1: PME# disabled
[    0.466894] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.466896] pci 0000:00:1c.3: PME# disabled
[    0.466945] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.466947] pci 0000:00:1c.7: PME# disabled
[    0.466989] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf063b000-0xf063b3ff]
[    0.467033] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.467036] pci 0000:00:1d.0: PME# disabled
[    0.467140] pci 0000:00:1f.2: reg 10 io port: [0xf0d0-0xf0d7]
[    0.467144] pci 0000:00:1f.2: reg 14 io port: [0xf0c0-0xf0c3]
[    0.467148] pci 0000:00:1f.2: reg 18 io port: [0xf0b0-0xf0b7]
[    0.467151] pci 0000:00:1f.2: reg 1c io port: [0xf0a0-0xf0a3]
[    0.467155] pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
[    0.467159] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf063a000-0xf063a7ff]
[    0.467178] pci 0000:00:1f.2: PME# supported from D3hot
[    0.467180] pci 0000:00:1f.2: PME# disabled
[    0.467201] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf0639000-0xf06390ff]
[    0.467211] pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
[    0.467295] pci 0000:02:00.0: reg 10 io port: [0xe000-0xe0ff]
[    0.467312] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xf0504000-0xf0504fff]
[    0.467324] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf0500000-0xf0503fff]
[    0.467364] pci 0000:02:00.0: supports D1 D2
[    0.467365] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.467368] pci 0000:02:00.0: PME# disabled
[    0.467414] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[    0.467416] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0500000-0xf05fffff]
[    0.467533] pci 0000:03:00.0: supports D1 D2
[    0.467534] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.467539] pci 0000:03:00.0: PME# disabled
[    0.467571] pci 0000:00:1c.3: transparent bridge
[    0.467651] pci 0000:03:00.0: transparent bridge
[    0.467719] pci 0000:05:00.0: reg 10 io port: [0xd000-0xd0ff]
[    0.467737] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xf0404000-0xf0404fff]
[    0.467749] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xf0400000-0xf0403fff]
[    0.467788] pci 0000:05:00.0: supports D1 D2
[    0.467789] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.467793] pci 0000:05:00.0: PME# disabled
[    0.467837] pci 0000:00:1c.7: bridge io port: [0xd000-0xdfff]
[    0.467840] pci 0000:00:1c.7: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[    0.467856] pci_bus 0000:00: on NUMA node 0
[    0.467863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.468277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.468459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.468642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.468823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[    0.495754] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.495954] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.496151] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.496347] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.496542] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.496735] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.496931] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.497127] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.497299] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.497308] vgaarb: loaded
[    0.497479] SCSI subsystem initialized
[    0.497526] libata version 3.00 loaded.
[    0.497685] usbcore: registered new interface driver usbfs
[    0.497742] usbcore: registered new interface driver hub
[    0.497778] usbcore: registered new device driver usb
[    0.497927] PCI: Using ACPI for IRQ routing
[    0.498093] NetLabel: Initializing
[    0.498094] NetLabel:  domain hash size = 128
[    0.498094] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.498115] NetLabel:  unlabeled traffic allowed by default
[    0.498177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.498180] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.500191] Switching to clocksource tsc
[    0.500268] pnp: PnP ACPI init
[    0.500272] ACPI: bus type pnp registered
[    0.506977] pnp: PnP ACPI: found 13 devices
[    0.506978] ACPI: ACPI bus type pnp unregistered
[    0.506985] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.506989] system 00:05: ioport range 0x680-0x69f has been reserved
[    0.506990] system 00:05: ioport range 0xffff-0xffff has been reserved
[    0.506992] system 00:05: ioport range 0xffff-0xffff has been reserved
[    0.506993] system 00:05: ioport range 0xffff-0xffff has been reserved
[    0.506995] system 00:05: ioport range 0x1c00-0x1cfe has been reserved
[    0.506996] system 00:05: ioport range 0x1d00-0x1dfe has been reserved
[    0.506998] system 00:05: ioport range 0x1e00-0x1efe has been reserved
[    0.506999] system 00:05: ioport range 0x1f00-0x1ffe has been reserved
[    0.507001] system 00:05: ioport range 0x1800-0x18fe has been reserved
[    0.507002] system 00:05: ioport range 0x164e-0x164f has been reserved
[    0.507005] system 00:07: ioport range 0x1854-0x1857 has been reserved
[    0.507008] system 00:08: ioport range 0xa00-0xa0f has been reserved
[    0.507009] system 00:08: ioport range 0xa30-0xa3f has been reserved
[    0.507011] system 00:08: ioport range 0xa20-0xa2f has been reserved
[    0.507014] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.507017] system 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.507019] system 00:0c: iomem range 0xfed10000-0xfed17fff has been reserved
[    0.507021] system 00:0c: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.507022] system 00:0c: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.507024] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.507025] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.507027] system 00:0c: iomem range 0xfed90000-0xfed93fff has been reserved
[    0.507028] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.507030] system 00:0c: iomem range 0xff000000-0xffffffff has been reserved
[    0.507032] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[    0.507033] system 00:0c: iomem range 0xf7fef000-0xf7feffff has been reserved
[    0.507035] system 00:0c: iomem range 0xf7ff0000-0xf7ff0fff has been reserved
[    0.541874] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.541875] pci 0000:00:1c.0:  IO window: disabled
[    0.541878] pci 0000:00:1c.0:  MEM window: disabled
[    0.541880] pci 0000:00:1c.0:  PREFETCH window: disabled
[    0.541884] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    0.541886] pci 0000:00:1c.1:  IO window: 0xe000-0xefff
[    0.541889] pci 0000:00:1c.1:  MEM window: 0xf0500000-0xf05fffff
[    0.541891] pci 0000:00:1c.1:  PREFETCH window: disabled
[    0.541895] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[    0.541896] pci 0000:03:00.0:  IO window: disabled
[    0.541903] pci 0000:03:00.0:  MEM window: disabled
[    0.541907] pci 0000:03:00.0:  PREFETCH window: disabled
[    0.541916] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[    0.541916] pci 0000:00:1c.3:  IO window: disabled
[    0.541919] pci 0000:00:1c.3:  MEM window: disabled
[    0.541921] pci 0000:00:1c.3:  PREFETCH window: disabled
[    0.541925] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:05
[    0.541927] pci 0000:00:1c.7:  IO window: 0xd000-0xdfff
[    0.541930] pci 0000:00:1c.7:  MEM window: 0xf0400000-0xf04fffff
[    0.541932] pci 0000:00:1c.7:  PREFETCH window: disabled
[    0.541942] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.541944] pci 0000:00:1c.0: setting latency timer to 64
[    0.541950] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.541952] pci 0000:00:1c.1: setting latency timer to 64
[    0.541961] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.541963] pci 0000:00:1c.3: setting latency timer to 64
[    0.541973] pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.541978] pci 0000:03:00.0: setting latency timer to 64
[    0.541984] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.541986] pci 0000:00:1c.7: setting latency timer to 64
[    0.541988] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.541989] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.541991] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.541992] pci_bus 0000:02: resource 1 mem: [0xf0500000-0xf05fffff]
[    0.541993] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.541994] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.541995] pci_bus 0000:04: resource 6 io:  [0x00-0xffff]
[    0.541996] pci_bus 0000:04: resource 7 mem: [0x000000-0xffffffffffffffff]
[    0.541998] pci_bus 0000:05: resource 0 io:  [0xd000-0xdfff]
[    0.541999] pci_bus 0000:05: resource 1 mem: [0xf0400000-0xf04fffff]
[    0.542014] NET: Registered protocol family 2
[    0.542050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.542165] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.542266] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.542315] TCP: Hash tables configured (established 131072 bind 65536)
[    0.542316] TCP reno registered
[    0.542358] NET: Registered protocol family 1
[    0.542366] pci 0000:00:02.0: Boot video device
[    0.573657] Trying to unpack rootfs image as initramfs...
[    0.576322] Freeing initrd memory: 134k freed
[    0.583203] DMA-API: preallocated 32768 debug entries
[    0.583204] DMA-API: debugging enabled by kernel config
[    0.584439] apm: BIOS not found.
[    0.584662] audit: initializing netlink socket (disabled)
[    0.584669] type=2000 audit(1394637649.428:1): initialized
[    0.586976] highmem bounce pool size: 64 pages
[    0.586978] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.591053] msgmni has been set to 1490
[    0.591128] SELinux:  Registering netfilter hooks
[    0.591277] alg: No test for stdrng (krng)
[    0.591351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.591352] io scheduler noop registered
[    0.591353] io scheduler deadline registered
[    0.591436] io scheduler cfq registered (default)
[    0.591548] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.591554] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.591648] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.591653] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.591747] pcieport 0000:00:1c.7: irq 26 for MSI/MSI-X
[    0.591752] pcieport 0000:00:1c.7: setting latency timer to 64
[    0.591866] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.591867] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.593100] input: Power Button as /class/input/input0
[    0.593103] ACPI: Power Button [PWRB]
[    0.593163] input: Power Button as /class/input/input1
[    0.593164] ACPI: Power Button [PWRF]
[    0.593352] fan PNP0C0B:00: registered as cooling_device0
[    0.593356] ACPI: Fan [FAN0] (off)
[    0.593494] fan PNP0C0B:01: registered as cooling_device1
[    0.593497] ACPI: Fan [FAN1] (off)
[    0.593633] fan PNP0C0B:02: registered as cooling_device2
[    0.593637] ACPI: Fan [FAN2] (off)
[    0.593775] fan PNP0C0B:03: registered as cooling_device3
[    0.593779] ACPI: Fan [FAN3] (off)
[    0.593913] fan PNP0C0B:04: registered as cooling_device4
[    0.593917] ACPI: Fan [FAN4] (off)
[    0.594768] ACPI: SSDT ba3b1c18 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)

[    0.596394] Monitor-Mwait will be used to enter C-1 state
[    0.596406] Monitor-Mwait will be used to enter C-2 state
[    0.596475] processor LNXCPU:00: registered as cooling_device5
[    0.597293] ACPI: SSDT ba3b1618 005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.598124] ACPI: SSDT ba3b0d98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.599267] processor LNXCPU:01: registered as cooling_device6
[    0.600768] processor LNXCPU:02: registered as cooling_device7
[    0.602226] processor LNXCPU:03: registered as cooling_device8
[    0.613401] thermal LNXTHERM:01: registered as thermal_zone0
[    0.613407] ACPI: Thermal Zone [TZ00] (28 C)
[    0.614164] thermal LNXTHERM:02: registered as thermal_zone1
[    0.614170] ACPI: Thermal Zone [TZ01] (30 C)
[    0.614203] isapnp: Scanning for PnP cards...
[    0.970755] isapnp: No Plug & Play device found
[    0.994322] Non-volatile memory driver v1.3
[    0.994324] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.994440] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.994890] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.996535] brd: module loaded
[    0.996565] Uniform Multi-Platform E-IDE driver
[    0.997417] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    0.997423] Probing IDE interface ide0...
[    1.000417] ide0: no devices on the port
[    1.000468] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    1.000480] Probing IDE interface ide1...
[    1.003475] ide1: no devices on the port
[    1.003527] ide1 at 0x170-0x177,0x376 on irq 15
[    1.003568] ide-gd driver 1.18
[    1.003722] usbcore: registered new interface driver libusual
[    1.003837] PNP: No PS/2 controller found. Probing ports directly.
[    1.004220] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.004223] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.004293] mice: PS/2 mouse device common for all mice
[    1.004919] cpuidle: using governor ladder
[    1.005591] cpuidle: using governor menu
[    1.006512] usbcore: registered new interface driver hiddev
[    1.006541] usbcore: registered new interface driver usbhid
[    1.006542] usbhid: v2.6:USB HID core driver
[    1.006717] TCP cubic registered
[    1.006717] Initializing XFRM netlink socket
[    1.006721] NET: Registered protocol family 17
[    1.006759] Using IPI No-Shortcut mode
[    1.006879] registered taskstats version 1
[    1.007245] Freeing unused kernel memory: 448k freed
[    1.008776] ahci 0000:00:1f.2: version 3.0
[    1.008783] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.008805] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    1.008836] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.008838] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    1.008840] ahci 0000:00:1f.2: setting latency timer to 64
[    1.008881] scsi0 : ahci
[    1.009018] scsi1 : ahci
[    1.009067] scsi2 : ahci
[    1.009116] scsi3 : ahci
[    1.009165] scsi4 : ahci
[    1.009213] scsi5 : ahci
[    1.009256] ata1: SATA max UDMA/133 abar m2048@0xf063a000 port 0xf063a100 irq 27
[    1.009257] ata2: DUMMY
[    1.009257] ata3: DUMMY
[    1.009258] ata4: DUMMY
[    1.009259] ata5: DUMMY
[    1.009259] ata6: DUMMY
[    1.305947] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.307145] ata1.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
[    1.307147] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.308665] ata1.00: configured for UDMA/133
[    1.308780] scsi 0:0:0:0: Direct-Access    ATA      ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
[    1.310530] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.310532] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.310649] sd 0:0:0:0: [sda] Write Protect is off
[    1.310650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.310680] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.310838] sda: detected capacity change from 0 to 500107862016
[    1.310842]  sda: sda1 sda2
[    1.331417] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.370004] kjournald starting.  Commit interval 5 seconds
[    1.370039] EXT3-fs: mounted filesystem with ordered data mode.
[    3.582178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.582197] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.582209] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.582211] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    3.582282] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.582304] ehci_hcd 0000:00:1a.0: debug port 2
[    3.586168] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    3.588461] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf063c000
[    3.596694] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.597367] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.597393] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.597394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.597395] usb usb1: Product: EHCI Host Controller
[    3.597396] usb usb1: Manufacturer: Linux 2.6.32.43-57.e43.i686.PAE ehci_hcd
[    3.597397] usb usb1: SerialNumber: 0000:00:1a.0
[    3.597455] usb usb1: configuration #1 chosen from 1 choice
[    3.597478] hub 1-0:1.0: USB hub found
[    3.597482] hub 1-0:1.0: 2 ports detected
[    3.597552] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.597563] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.597565] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    3.597607] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.597629] ehci_hcd 0000:00:1d.0: debug port 2
[    3.601503] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    3.601514] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf063b000
[    3.602356] input: PC Speaker as /class/input/input2
[    3.610272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.610288] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.610320] r8169 0000:02:00.0: setting latency timer to 64
[    3.610329] r8169 0000:02:00.0: unknown MAC, using family default
[    3.610396] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
[    3.610546] eth0: RTL8168b/8111b at 0xf816c000, 00:13:3b:0e:04:4a, XID 0c900800 IRQ 28
[    3.611335] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.611361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.611362] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.611364] usb usb2: Product: EHCI Host Controller
[    3.611365] usb usb2: Manufacturer: Linux 2.6.32.43-57.e43.i686.PAE ehci_hcd
[    3.611365] usb usb2: SerialNumber: 0000:00:1d.0
[    3.611422] usb usb2: configuration #1 chosen from 1 choice
[    3.611445] hub 2-0:1.0: USB hub found
[    3.611449] hub 2-0:1.0: 2 ports detected
[    3.612778] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.612793] r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.612828] r8169 0000:05:00.0: setting latency timer to 64
[    3.612833] r8169 0000:05:00.0: unknown MAC, using family default
[    3.612890] r8169 0000:05:00.0: irq 29 for MSI/MSI-X
[    3.613041] eth1: RTL8168b/8111b at 0xf8170000, 00:13:3b:0e:04:9c, XID 0c900800 IRQ 29
[    3.898534] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    4.012562] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    4.012564] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.012635] usb 1-1: configuration #1 chosen from 1 choice
[    4.012807] hub 1-1:1.0: USB hub found
[    4.012917] hub 1-1:1.0: 6 ports detected
[    4.114912] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    4.199292] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[    4.228934] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    4.228936] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.228994] usb 2-1: configuration #1 chosen from 1 choice
[    4.229053] hub 2-1:1.0: USB hub found
[    4.229158] hub 2-1:1.0: 8 ports detected
[    4.502892] usb 2-1.5: new high speed USB device using ehci_hcd and address 3
[    4.587862] usb 2-1.5: New USB device found, idVendor=045b, idProduct=0209
[    4.587863] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.587934] usb 2-1.5: configuration #1 chosen from 1 choice
[    4.588006] hub 2-1.5:1.0: USB hub found
[    4.588110] hub 2-1.5:1.0: 4 ports detected
[    4.625488] EXT3 FS on sda1, internal journal
[    4.661409] usb 2-1.6: new high speed USB device using ehci_hcd and address 4
[    4.746433] usb 2-1.6: New USB device found, idVendor=045b, idProduct=0209
[    4.746434] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.746496] usb 2-1.6: configuration #1 chosen from 1 choice
[    4.746557] hub 2-1.6:1.0: USB hub found
[    4.746649] hub 2-1.6:1.0: 4 ports detected
[    4.792338] kjournald starting.  Commit interval 5 seconds
[    4.792593] EXT3 FS on dm-3, internal journal
[    4.792596] EXT3-fs: mounted filesystem with ordered data mode.
[    4.847760] kjournald starting.  Commit interval 5 seconds
[    4.848023] EXT3 FS on dm-1, internal journal
[    4.848025] EXT3-fs: mounted filesystem with ordered data mode.
[    4.875210] kjournald starting.  Commit interval 5 seconds
[    4.875441] EXT3 FS on dm-2, internal journal
[    4.875443] EXT3-fs: mounted filesystem with ordered data mode.
[    5.019518] usb 2-1.6.4: new low speed USB device using ehci_hcd and address 5
[    5.111375] usb 2-1.6.4: New USB device found, idVendor=413c, idProduct=2106
[    5.111376] usb 2-1.6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.111378] usb 2-1.6.4: Product: Dell QuietKey Keyboard
[    5.111379] usb 2-1.6.4: Manufacturer: Dell
[    5.111442] usb 2-1.6.4: configuration #1 chosen from 1 choice
[    5.114937] input: Dell Dell QuietKey Keyboard as /class/input/input3
[    5.115028] generic-usb 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.6.4/input0
[  11.085174] Adding 6029304k swap on /dev/dm-0.  Priority:-1 extents:1 across:6029304k
[  15.189490] Initializing USB Mass Storage driver...
[  15.189516] usbcore: registered new interface driver usb-storage
[  15.189519] USB Mass Storage support registered.
[  15.281237] CAPI Subsystem Rev 1.1.2.8
[  15.282304] capifs: Rev 1.1.2.3
[  15.286050] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
[  15.823069] ocf: module license 'BSD' taints kernel.
[  15.823071] Disabling lock debugging due to kernel taint
[  16.154188] padlock: VIA PadLock not detected.
[  16.390010] ip_tables: (C) 2000-2006 Netfilter Core Team
[  16.406561] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  16.406747] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[  16.406748] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[  16.406748] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[  16.628881] r8169: eth1: link up
[  16.628885] r8169: eth1: link up
[  16.630285] r8169: eth0: link up
[  16.630289] r8169: eth0: link up
[  16.726011] r8169: eth1: link up
[  16.727370] r8169: eth0: link up
[  16.879579] Bridge firewalling registered
[  17.106414] device eth0 entered promiscuous mode
[  17.108709] br0: port 1(eth0) entering learning state
[  19.757730] Netfilter messages via NETLINK v0.30.
[  20.294520] NET: Registered protocol family 10
[  20.530689] Ebtables v2.0 registered
[  20.698419] r8169: eth1: link up
[  21.096525] br0: port 1(eth0) entering forwarding state
[  30.831332] br2: no IPv6 routers present
[  31.130473] br1: no IPv6 routers present
[  31.180329] eth0: no IPv6 routers present
[  31.203263] br0: no IPv6 routers present
[  31.598515] eth1: no IPv6 routers present
[  51.357129] r8169: eth1: link up
[  52.403204] r8169: eth1: link up


só reconhece duas placas

ele reconhece a placa aqui mas ela não sobe por nada

observe:

lspci|grep Ethernet
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

e sempre que eu tento compilar o drive recebo a seguinte menssagem:

rpmbuild -tb e1000e-3.0.4.tar.gz

gunzip: stdout: Broken pipe
error: Failed to rename /usr/src/redhat/SPECS/rpm-spec.7iKIZq to /usr/src/redhat/SPECS/rpm-spec.7iKIZq: No such file or directory: No such file or directory

alguem pode me ajudar com isto? estou vasculhando tudo qto é canto atras disto e não encontro solução

quando vc roda modprobe e1000e ele te dá algum erro?

roda o ifup eth3.

modprobe não retorna nada e ifug da comando não existente

rodando o comando  lspci |grep -i Ethernet recebo o seguinte

lspci |grep -i Ethernet
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)


aqui ele identifica a placa, consegui também instalar o kernel-module-e1000e-PAE-1.3.10a-2.endian2_2.6.32.43_57.e43.i586.rpm sem erros porém a porra da placa não sobe (desculpem novamente a palavra mas ja to muito nervoso com isso)
galera qq ajuda é muito bem vinda
abraços

rodando o dmesg agora

[ 6346.212497] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 6346.212498] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 8820.957858] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-e1000e instead

tenta dar o ifup eth3 man. se tiver uma placa só tenta o ifup eth2!

então tenho 3 placas de rede e faço o comando "ifconfig eth3 up" (pois o ifup não funfa aqui ) e vem o resultado de que a placa não existe.
mano esse trampo todo pq essa placa (http://br.gigabyte.com/products/product ... id=4518#ov) é foda. é a rede onboard dela que da pau, as outras duas que tenho vai numa boa mas a on-board ta tenso.
nem isso funfou aqui >> http://sourceforge.net/p/e1000/bugs/377/

bom galera depois de 3 semanas..... essa budega ainda não funciona kkk. que meleca alguma sugestão?
até mesmo com a gigabyte ja entrei em contato e mesmo eles disseram que não tem suporte/driver para esta placa no linux/endian. vcs conhecem algum gato/gambiarra que faça essa placa funcionar?

abraços e obrigado a ajuda de todos

Amigão,

Acabei de ter este problema aqui. Fui atualizar o firewall de uma filial do interior usando efw-upgrade e a placa de rede onboard parou(é uma Dell Optiplex 790, usa a placa onboard Intel 82579V - driver e1000e). Também não consegui compilar o driver no kernel 2.6.32.43-57.e51.i586, então fiz downgrade para o kernel 2.6.32.43-57.e43.i586 (é o kernel da Endian 2.5.1). Não é a solução ideal (já que há vários bugfixes do kernel e51) mas funciona! 

Baixe os arquivos:
http://updates.endian.org/2.5.1/pool/ke ... 3.i586.rpm
http://updates.endian.org/2.5.1/pool/e1 ... 3.i586.rpm
http://updates.endian.org/2.5.1/pool/ke ... 3.i586.rpm

e os envie para o /root da máquina(use o SCP). Instale-os com:

rpm -Uvh *.rpm --oldpackage

Adicione no arquivo /etc/modprobe.conf:

alias eth e1000e

Então copie o módulo para seus lugar, ajuste as permissões e o instale:

cp /root/e1000e.ko* /lib/modules/2.6.32.43-57.e43.i586/kernel/drivers/net/
chmod 744 /lib/modules/2.6.32.43-57.e43.i586/kernel/drivers/net/e1000e.ko*
insmod.static /lib/modules/2.6.32.43-57.e43.i586/kernel/drivers/net/e1000e.ko
depmod -a

Confira se a placa foi reconhecida (com mii-tool ou ifconfig) e pode rebootar! 

valeu, mas e ja comprei outra placa of-board para solucionar meu problema porém ja esta salvo aqui seu tuto muito obrigado